17. USB3 ports have an extra set of contacts for the USB3 connectors, but retain the standard USB2 connectors so that the ports can handle both. So your old cable will work, but only at USB2 speeds, because it has no USB3 connectors. Share. Since that display model has a native USB-C inputs, you can use a regular USB-C cable to connect the XPS to Display #1, then use a regular DisplayPort cable to connect #1 to #2. Also be aware that you might have to go into the settings on the display itself to enable DisplayPort 1.2 mode or DisplayPort MST mode in order to make daisy-chaining work.

Cut the USB cable or cables you wish to splice at the designed length using a wire cutter. 2. Cut a 1-inch section of the plastic sheathing from the end of each wire segment using a razor blade.

Cable Matters makes an active USB-C cable that incorporates signal booster chips that runs 3 meters / 10 feet and supports USB 3.1 Gen 2, but it only supports 60W PD. If there aren't even full cables that support 3.1 Gen 2 at longer lengths, I'm not surprised extension cables aren't turning up in your search. Full-length USB 3.0 cables + hub. Jcordeiro's answer goes farther to discuss the problem he experienced trying to use a hub to significantly extend the distance using USB 3.0 cables. Multiple USB 3.0 cables to reach 3 meters. The limitation doesn't end there. You can't even count on combining short USB 3.0 cables to reach the length limit. . 476 378 108 272 353 435 32 166

can you extend a usb c cable